Hub install - Saskatoon

User avatar
Firesong
Posts: 1363
Joined: Tue Feb 03, 2009 9:03 am
Member's Photo Album: http://www.delica.ca/Photos/
Vehicle: 1998 L400 Delica Chamonix
Location: Saskatoon
Location: Saskatoon, SK. Canada

Hub install - Saskatoon

Postby Firesong » Sat Aug 28, 2010 8:56 am

If anyone is in the neighborhood and wants to install their hubs
at the same time, Im going to do mine probably around 2 pmish.
I have the garage and tools, should be fun.
Saturday (today) 8/28/10

Firesong

User avatar
Firesong
Posts: 1363
Joined: Tue Feb 03, 2009 9:03 am
Member's Photo Album: http://www.delica.ca/Photos/
Vehicle: 1998 L400 Delica Chamonix
Location: Saskatoon
Location: Saskatoon, SK. Canada

Re: Hub install - Saskatoon

Postby Firesong » Sat Aug 28, 2010 11:45 am

I went ahead and had a look at mine, figured what the heck.
Total job time was under an hour easy.
Hardest part was putting that darn C clip back in the groove :)
Looks good.
It's easy.
Don't be intimidated by this job, you can do it in the driveway easy.
To take the outer ring off (cap of auto) I used big pipe wrench.

J

User avatar
after oil
Posts: 1429
Joined: Mon Feb 11, 2008 7:01 pm
Member's Photo Album: http://www.delica.ca/Photos/
Vehicle: 92 cham-reimo poptop L300. 78MB240D
Location: on the road
Location: occupied coast salish territory aka powell river

Re: Hub install - Saskatoon

Postby after oil » Sat Aug 28, 2010 5:30 pm

thanks for the heads up. my hubs are waiting at the bus depot. happy to know it went easy. id like to see some photos if somebody else does this

fexlboi
Posts: 1671
Joined: Thu Jun 19, 2008 11:28 pm
Member's Photo Album: http://dinoevo.de
Vehicle: -
Location: -
Contact:

Re: Hub install - Saskatoon

Postby fexlboi » Sat Aug 28, 2010 5:52 pm

I highly recommend the right pliers for the clip. It is just so much easier and saves you quite bit of time and swearing :-D
Last edited by fexlboi on Sun Aug 29, 2010 9:38 am, edited 1 time in total.

User avatar
Firesong
Posts: 1363
Joined: Tue Feb 03, 2009 9:03 am
Member's Photo Album: http://www.delica.ca/Photos/
Vehicle: 1998 L400 Delica Chamonix
Location: Saskatoon
Location: Saskatoon, SK. Canada

Re: Hub install - Saskatoon

Postby Firesong » Sun Aug 29, 2010 8:58 am

I ended up simply using two flat blade screwdrivers.
It came off easy, putting it back on took a little more time.
It's certainly doable with out the right pliers, just takes
a bit of calm :)
FS


Return to “Events - Saskabush”

Who is online

Users browsing this forum: No registered users and 2 guests