Tool for holding the cam sprocket/crank pulley

Temporary tool loans or swaps
User avatar
DylanQ
Posts: 14
Joined: Fri Mar 29, 2013 10:18 pm
Member's Photo Album: http://www.delica.ca/Photos/
Vehicle: 92 L300
Location: Terrace BC

Tool for holding the cam sprocket/crank pulley

Postby DylanQ » Tue Mar 04, 2014 1:03 pm

I am wondering if anyone has the tool for holding the cam sprocket/ crank pulley while it's getting torqued and would be willing to lend/rent it for a day or two. I'm in Salmon Arm BC. Or if anyone has an idea of something that could be rigged up to work the same?

Cheers,

Dylan

User avatar
lrp374
Posts: 890
Joined: Sun Nov 23, 2008 9:56 pm
Vehicle: 91 Super Exceed
Location: Kamloops

Re: Tool for holding the cam sprocket/crank pulley

Postby lrp374 » Wed Mar 05, 2014 9:51 am

Canadian Tire in Salmon Arm may loan tools. They do @ several other locations.

thelazygreenfox
Posts: 815
Joined: Tue Jun 08, 2010 7:21 am
Member's Photo Album: http://www.delica.ca/Photos/
Vehicle: 99 white Hi roof gas Chamonix
Location: Coquitlam B.C.
Location: coquitlam canada

Re: Tool for holding the cam sprocket/crank pulley

Postby thelazygreenfox » Wed Mar 05, 2014 1:46 pm

In a pinch you can use a strap wrench to hold the pulley. There is a pic of the proper tool but can't remember where I saw it on this site. Princess auto has a fan belt wrench that tightens or to its self. Use a proper torque wrench and torque to specs.
good luck
TLGF
I've been a lazy brown, green and white fox. :M Moby Dick isn't lazy anymore but what's a "Dick?" :-D

User avatar
thedjjack
Posts: 2025
Joined: Wed Jan 27, 2010 12:13 am
Member's Photo Album: http://www.delica.ca/forum/ucp.php?i=164
Vehicle: 1989 L300 HITOP!!
Location: Port McNeill
Location: Port McNeill
Contact:

Re: Tool for holding the cam sprocket/crank pulley

Postby thedjjack » Wed Mar 05, 2014 10:04 pm

I have used an old timing belt to hold the sprocket in the past.... I suspect most timing belts are the same teeth spacing so a garage may have one in the garbage


Return to “Tool Swaps, Share, Trade”

Who is online

Users browsing this forum: No registered users and 1 guest