1999 L400 - Headlamp Assemblies for LHD compliance in Alberta

Mitsubishi Delica L400 production commenced in 1994 -- After much anticipation, the L400 arrived on Canadian Soil in 2009!
Post Reply
breelion
Posts: 3
Joined: Mon Jul 22, 2019 6:15 pm
Member's Photo Album: http://www.delica.ca/Photos/
Vehicle: Mitsubishi Delica
Location: Calgary

1999 L400 - Headlamp Assemblies for LHD compliance in Alberta

Post by breelion »

Hey there! Looking at purchasing a 1999 Spacegear L400 from a seller in Golden BC. However, I live in Alberta and according to a shop I just spoke to, it would fail an AB Out of Province inspection because the headlamp assemblies are for RHD and therefore angled into oncoming traffic. I'm curious how others have gotten around this or if you know where I could find the LHD assembly for this year/model?
kurtiswilk
Posts: 77
Joined: Thu Dec 18, 2014 10:44 pm
Member's Photo Album: http://www.delica.ca/Photos/
Vehicle: 97 L400 super exceed
Location: Calgary, alberta

1999 L400 - Headlamp Assemblies for LHD compliance in Alberta

Post by kurtiswilk »

There. Lee a few shops in Vancouver that likely have them

Combs auto - http://www.ccautos.ca/contact-us/
Cvi - (604) 247-0500
rising sun - http://www.rs-import.ca/infodesk/custom_center.php



I've got parts from them all, all fairly helpful.

You could try Adair auto in Calgary, but when I've tried them they usually just mark up parts from above

Kurtis
Deli Duncan
97 L400 gen 2
harshjay
Posts: 9
Joined: Sun Apr 14, 2019 8:37 am
Member's Photo Album: http://www.delica.ca/Photos/
Vehicle: mitsubishi delica
Location: calgary

1999 L400 - Headlamp Assemblies for LHD compliance in Alberta

Post by harshjay »

hey friend. What identification marks are on your headlights? Can you post a picture? I have a 2002 with no bias arrows (for either left or right) and the lens is clear, so all that is required is a re-aim
Post Reply

Return to “L400 Technical”