Delica Autobody

Mitsubishi Delica L400 production commenced in 1994 -- After much anticipation, the L400 arrived on Canadian Soil in 2009!
Post Reply
husbandaid
Posts: 3
Joined: Wed Feb 22, 2017 12:21 pm
Member's Photo Album: http://www.delica.ca/Photos/
Vehicle: l400 Delica
Location: Calgary

Delica Autobody

Post by husbandaid »

Hello
I've been a happy L400 owner for about 5 years and was recently in an accident that caused some front bumper/ possibly some frame damage. I live in Calgary and after visiting some of the big autobody shops I am having a difficult time finding someone who will work on the van. I've purchased a new bumper and bush guard at coombs county however still cannot find a shop/ person who is able to assist. I was wondering if anyone could recommend an autobody shop/ person in Alberta or even a shop in BC that may be comfortable/ used to working on JDM autobody?
thanks in advance.

Brett
poochike
Posts: 186
Joined: Sat Jun 25, 2011 12:52 pm
Member's Photo Album: http://www.delica.ca/Photos/
Vehicle: 1999 L400 Chamonix Gen2
Location: vancouver
Location: Vancouver

Delica Autobody

Post by poochike »

husbandaid wrote:Hello
I've been a happy L400 owner for about 5 years and was recently in an accident that caused some front bumper/ possibly some frame damage. I live in Calgary and after visiting some of the big autobody shops I am having a difficult time finding someone who will work on the van. I've purchased a new bumper and bush guard at coombs county however still cannot find a shop/ person who is able to assist. I was wondering if anyone could recommend an autobody shop/ person in Alberta or even a shop in BC that may be comfortable/ used to working on JDM autobody?
thanks in advance.

Brett
I use these guys. Really good work.

http://www.stillcreekcollisioninc.com

Sent from my SM-G920W8 using Tapatalk
husbandaid
Posts: 3
Joined: Wed Feb 22, 2017 12:21 pm
Member's Photo Album: http://www.delica.ca/Photos/
Vehicle: l400 Delica
Location: Calgary

Delica Autobody

Post by husbandaid »

Thanks for the reply! if i need to take this out to BC i'll check them out.
Post Reply

Return to “L400 Technical”