SRS Light on after stereo/DRL install
Posted: Mon Mar 12, 2018 9:36 pm
I removed panels from the dash to clean up wiring from the Japanese owner and add a radio/DRL module. Everything was working great, until the SRS light started coming on the day after. Is it possible I may have bumped a connector or reset the system by disconnecting the battery?
What I've tried so far: checked/wiggled all connectors I could find for the SRS system. Checked all fuses in the under-dash and engine boxes. Disconnected any wiring I added (stereo harness).
Any suggestions on how to proceed? Any Calgary locals with a scan tool or know of a shop that can check for me?
Thanks!
What I've tried so far: checked/wiggled all connectors I could find for the SRS system. Checked all fuses in the under-dash and engine boxes. Disconnected any wiring I added (stereo harness).
Any suggestions on how to proceed? Any Calgary locals with a scan tool or know of a shop that can check for me?
Thanks!