Pyrometer

Mitsubishi Delica L400 production commenced in 1994 -- After much anticipation, the L400 arrived on Canadian Soil in 2009!
Post Reply
jimmyleduc
Posts: 33
Joined: Fri Feb 17, 2017 11:37 pm
Member's Photo Album: http://www.delica.ca/Photos/
Vehicle: None
Location: Revelstoke

Pyrometer

Post by jimmyleduc »

L400 2nd gen
Where and how to install a pyrometer.
Please and thanks

If you have video


Envoyé de mon iPhone en utilisant Tapatalk
Avittery
Posts: 17
Joined: Thu Dec 01, 2016 12:25 am
Member's Photo Album: http://www.delica.ca/Photos/
Vehicle: 96 L400 LWB
Location: N. Vancouver island

Pyrometer

Post by Avittery »

I installed my autometer 2 1/16 pyrometer gauge in replacement of the inclinometer. fits perfect in the same hole in that instrument cluster and just wired it into the existing wires from the temperature gauge.
As for the thermocoupler...I tapped it into my blanking plate where my EGR used to be and ran the cables through the steering column grommet in the firewall.

I can send you some photos of it if you want
Davidor
Posts: 23
Joined: Tue Dec 27, 2016 10:32 pm
Member's Photo Album: http://www.delica.ca/Photos/
Vehicle: 1995 L400 4M40
Location: Edmonton

Pyrometer

Post by Davidor »

Awesome to know the Autometer 2 1/16 gauges fit perfectly there. I was pondering that myself and just hadn't gone out to measure yet. Thanks for sharing that.
cags005
Posts: 11
Joined: Thu Aug 04, 2016 4:32 pm
Member's Photo Album: http://www.delica.ca/Photos/
Vehicle: Mitsubishi Delica
Location: Vancouver

Pyrometer

Post by cags005 »

Avittery wrote:I installed my autometer 2 1/16 pyrometer gauge in replacement of the inclinometer. fits perfect in the same hole in that instrument cluster and just wired it into the existing wires from the temperature gauge.
As for the thermocoupler...I tapped it into my blanking plate where my EGR used to be and ran the cables through the steering column grommet in the firewall.

I can send you some photos of it if you want

I would really like to see some photos if you wouldn't mind! Thanks!
Avittery
Posts: 17
Joined: Thu Dec 01, 2016 12:25 am
Member's Photo Album: http://www.delica.ca/Photos/
Vehicle: 96 L400 LWB
Location: N. Vancouver island

Pyrometer

Post by Avittery »

Sorry this took so long! Not entirely sure how to post photos here...

http://imgur.com/a/rwQ1E

http://imgur.com/a/lncgj
Attachments
New Image.JPG
New Image.JPG (358.73 KiB) Viewed 6638 times
jimmyleduc
Posts: 33
Joined: Fri Feb 17, 2017 11:37 pm
Member's Photo Album: http://www.delica.ca/Photos/
Vehicle: None
Location: Revelstoke

Pyrometer

Post by jimmyleduc »

Thank you.
Very helpful.


Envoyé de mon iPhone en utilisant Tapatalk
izack98
Posts: 138
Joined: Tue Apr 30, 2013 4:15 pm
Member's Photo Album: http://www.delica.ca/Photos/
Vehicle: 1997 L400 Super Exceed PE8W
Location: Delta B.C.

Pyrometer

Post by izack98 »

Does your inside/outside temperature read out work?
If so, were did you find the temp probes? Or do they come stock and the wiring is included in the connector of wires that plugs into the binnacle?
I have mine but haven't connected it yet so don't know if it works.
I'm looking for a reasonably priced Pyrometer.
Avittery - What did you pay for yours?
Post Reply

Return to “L400 Technical”