Pyrometer

Mitsubishi Delica L400 production commenced in 1994 -- After much anticipation, the L400 arrived on Canadian Soil in 2009!
jimmyleduc
Posts: 33
Joined: Fri Feb 17, 2017 11:37 pm
Member's Photo Album: http://www.delica.ca/Photos/
Vehicle: None
Location: Revelstoke

Pyrometer

Postby jimmyleduc » Sun Apr 16, 2017 11:20 am

L400 2nd gen
Where and how to install a pyrometer.
Please and thanks

If you have video


Envoyé de mon iPhone en utilisant Tapatalk

Avittery
Posts: 11
Joined: Thu Dec 01, 2016 12:25 am
Member's Photo Album: http://www.delica.ca/Photos/
Vehicle: 96 L400 LWB
Location: N. Vancouver island

Pyrometer

Postby Avittery » Wed May 03, 2017 2:17 pm

I installed my autometer 2 1/16 pyrometer gauge in replacement of the inclinometer. fits perfect in the same hole in that instrument cluster and just wired it into the existing wires from the temperature gauge.
As for the thermocoupler...I tapped it into my blanking plate where my EGR used to be and ran the cables through the steering column grommet in the firewall.

I can send you some photos of it if you want

Davidor
Posts: 8
Joined: Tue Dec 27, 2016 10:32 pm
Member's Photo Album: http://www.delica.ca/Photos/
Vehicle: 1995 L400 SWB
Location: Edmonton

Pyrometer

Postby Davidor » Sun May 07, 2017 10:02 am

Awesome to know the Autometer 2 1/16 gauges fit perfectly there. I was pondering that myself and just hadn't gone out to measure yet. Thanks for sharing that.

cags005
Posts: 11
Joined: Thu Aug 04, 2016 4:32 pm
Member's Photo Album: http://www.delica.ca/Photos/
Vehicle: Mitsubishi Delica
Location: Vancouver

Pyrometer

Postby cags005 » Thu May 11, 2017 11:26 am

Avittery wrote:I installed my autometer 2 1/16 pyrometer gauge in replacement of the inclinometer. fits perfect in the same hole in that instrument cluster and just wired it into the existing wires from the temperature gauge.
As for the thermocoupler...I tapped it into my blanking plate where my EGR used to be and ran the cables through the steering column grommet in the firewall.

I can send you some photos of it if you want



I would really like to see some photos if you wouldn't mind! Thanks!

Avittery
Posts: 11
Joined: Thu Dec 01, 2016 12:25 am
Member's Photo Album: http://www.delica.ca/Photos/
Vehicle: 96 L400 LWB
Location: N. Vancouver island

Pyrometer

Postby Avittery » Mon May 29, 2017 9:47 pm

Sorry this took so long! Not entirely sure how to post photos here...

http://imgur.com/a/rwQ1E

http://imgur.com/a/lncgj
Attachments
New Image.JPG
New Image.JPG (358.73 KiB) Viewed 306 times

jimmyleduc
Posts: 33
Joined: Fri Feb 17, 2017 11:37 pm
Member's Photo Album: http://www.delica.ca/Photos/
Vehicle: None
Location: Revelstoke

Pyrometer

Postby jimmyleduc » Tue Jun 06, 2017 2:33 pm

Thank you.
Very helpful.


Envoyé de mon iPhone en utilisant Tapatalk

izack98
Posts: 129
Joined: Tue Apr 30, 2013 4:15 pm
Member's Photo Album: http://www.delica.ca/Photos/
Vehicle: 1997 L400 Super Exceed PE8W
Location: Delta B.C.

Pyrometer

Postby izack98 » Sun Jun 11, 2017 12:07 am

Does your inside/outside temperature read out work?
If so, were did you find the temp probes? Or do they come stock and the wiring is included in the connector of wires that plugs into the binnacle?
I have mine but haven't connected it yet so don't know if it works.
I'm looking for a reasonably priced Pyrometer.
Avittery - What did you pay for yours?


Return to “L400 Technical”

Who is online

Users browsing this forum: No registered users and 1 guest