Rubber Seals (Run Channels) for sliding windows

Looking for a specific hard-to-find Delica part? Post your request in this section. Commercial postings can be found in "Delica Trader Parts Section".

Moderators: delicanuck, mark

User avatar
Pawel
Posts: 10
Joined: Sun Jul 12, 2015 3:36 pm
Member's Photo Album: http://www.delica.ca/Photos/
Vehicle: L300
Location: Vancouver, BC

Rubber Seals (Run Channels) for sliding windows

Postby Pawel » Wed Jul 15, 2015 9:20 am

Hi There,

Thanks to this amazing community I have managed to source sliding windows for my L300 Delica. I have three of them. Two for the right side and one for the sliding door.

Now, while the frame and the glass is in perfect order the rubber seal inside the channels is all brittle and falling apart. I would like to source a new run channels, find someone who does this kind of service or learn what would be the best way to deal with this issue.

20150715_091404.jpg
20150715_091404.jpg (273.48 KiB) Viewed 1779 times


Any help would be greatly appreciated.

Thank you,

Pawel

User avatar
Growlerbearnz
Posts: 1911
Joined: Sat Jun 26, 2010 1:58 pm
Member's Photo Album: http://www.delica.ca/Photos/
Vehicle: Delica P25W
Location: New Zealand

Rubber Seals (Run Channels) for sliding windows

Postby Growlerbearnz » Wed Jul 15, 2015 11:56 pm

Long wheelbase vans Part number MB416315 for the left, MB416316 for the right side. CAD$68.95 from Amayama.com.

You might be able to use more generic dual-channel flocked sliding window weatherstrip, something like this: http://www.ebay.ca/itm/310465588325
Nothing says "poor workmanship" more than wrinkles in the duct tape.

User avatar
Pawel
Posts: 10
Joined: Sun Jul 12, 2015 3:36 pm
Member's Photo Album: http://www.delica.ca/Photos/
Vehicle: L300
Location: Vancouver, BC

Re: Rubber Seals (Run Channels) for sliding windows

Postby Pawel » Thu Jul 16, 2015 8:08 pm

Thank you Growlerbearnz! Much appreciated!

I actually have three sliding windows. Two of them came from driver's side and one came from sliding doors on passenger side. Two of them appear to be identical but when put side by side there seems to be a slight difference in length - maybe 5mm.

20150716_200021.jpg
20150716_200021.jpg (222.03 KiB) Viewed 1762 times



Someone has told me the following part # for my windows and now I am slightly confused: MB416314, MB416313 and MB478209

Growlerbearnz wrote:Part number MB416315 for the left, MB416316 for the right side. CAD$68.95 from Amayama.com.

You might be able to use more generic dual-channel flocked sliding window weatherstrip, something like this: http://www.ebay.ca/itm/310465588325


The smallest window of three comes from passenger side and is the very back window and only one part of it opens up. Could you have a look at all those numbers and help me through the fog here?

Thank you very much!!!

Pawel

User avatar
Growlerbearnz
Posts: 1911
Joined: Sat Jun 26, 2010 1:58 pm
Member's Photo Album: http://www.delica.ca/Photos/
Vehicle: Delica P25W
Location: New Zealand

Re: Rubber Seals (Run Channels) for sliding windows

Postby Growlerbearnz » Fri Jul 17, 2015 7:13 pm

My part numbers are for the long wheelbase version, and they'll be slightly longer than the short ones.

You'd be better to look the part numbers up yourself for your exact model of van- go here

http://www.partsbase.org/mitsubishi/del ... 1986-1999/

and choose your model. The info you need is on the chassis plate below the drivers side seat.
Nothing says "poor workmanship" more than wrinkles in the duct tape.

User avatar
gabrielino2
Posts: 9
Joined: Thu Jun 20, 2013 10:52 pm
Member's Photo Album: http://www.delica.ca/Photos/
Vehicle: 1987 Turbo Diesel L300
Location: Oakland, California

Rubber Seals (Run Channels) for sliding windows

Postby gabrielino2 » Thu Oct 20, 2016 8:04 pm

I spent a long time trying to figure out where to get window channel, and what was what, so I thought I would share my findings.

Delica Window Channel Replacement for Right Side Drive Vehicles

Double sided foam moulding tape (I found this on Amazon for less than $10US - JVCC DC-WGT-01 Double Coated Window Glazing Tape: 1/8 in. thick x 1/4 in. x 75 ft)

For the right side behind the driver:
MB416314 - Right Side Window Channel
MB478210 - Right Side QT Panel Window Channel

For the left side behind the passenger:
MB416313 - Left Side Window Channel

MB416325 - Divider Seal (the vertical rubber that fits between the two sliding window panels)

Places to get the parts you need:

https://partsouq.com/ - didn’t have MB478210 when I inquired
https://www.amayama.com/en - had all the parts… they shipped from Japan. This is where I got the stuff from.
https://www.mitsubishipartswarehouse.com/ - had the left and right in stock but would have to special order MB478210
https://www.mitsubishiparts.net/ - did not appear to have MB478210

Note MB478209 - Is the LFT Quarter Panel window channel (for US left drive vehicles)

I paid $67US for each of the left and right side channel and $40US for the quarter panel on the right side… plus shipping (from Japan)

I did not replace the divider seal, because it was still in fair condition. The window channel was falling apart though, and water was getting in when it rained.

Installation and replacement was simple, but took some time. Take it easy and slow. Getting the new channel in was a little tough, but using a putty knife to seat it helped greatly. Hopefully the info above will help folks out there.

User avatar
Crankshaft Culture
Posts: 84
Joined: Tue Jun 20, 2017 11:07 am
Member's Photo Album: http://www.delica.ca/Photos/
Vehicle: 1989 Delica
Location: Portland, OR
Contact:

Rubber Seals (Run Channels) for sliding windows

Postby Crankshaft Culture » Sat Aug 05, 2017 3:22 pm

gabrielino2 wrote:
For the right side behind the driver:
MB416314 - Right Side Window Channel
MB478210 - Right Side QT Panel Window Channel

For the left side behind the passenger:
MB416313 - Left Side Window Channel


Sorry to bring back an old thread, but when I see the QT Panel Window Channel, is that the middle side window or rear side window?


Return to “Parts Wanted (Non-Commercial)”

Who is online

Users browsing this forum: No registered users and 4 guests