Can’t open sliding door from the inside on my L300. Outside is fine.

Does your Mitsubishi L300 make a strange noise? Need wheel alignment specs?
Delicatessan
Posts: 8
Joined: Sat Jun 09, 2018 12:09 am
Member's Photo Album: http://www.delica.ca/Photos/
Vehicle: Delica L300 ‘93
Location: Texas

Can’t open sliding door from the inside on my L300. Outside is fine.

Postby Delicatessan » Thu Oct 04, 2018 8:04 pm

Title says it all.

I can open the sliding door from the outside.

Door closes no problem.

But inside latch handle doesn’t cause door to unlatch so it can be opened.

Advice?

User avatar
north54
Posts: 175
Joined: Tue Oct 01, 2013 10:29 pm
Member's Photo Album: http://www.delica.ca/Photos/
Vehicle: 1989 P35W
Location: Vancouver

Can’t open sliding door from the inside on my L300. Outside is fine.

Postby north54 » Thu Oct 04, 2018 8:10 pm

Child safety switch on?
TRUSTY RUSTY

Delicatessan
Posts: 8
Joined: Sat Jun 09, 2018 12:09 am
Member's Photo Album: http://www.delica.ca/Photos/
Vehicle: Delica L300 ‘93
Location: Texas

Can’t open sliding door from the inside on my L300. Outside is fine.

Postby Delicatessan » Thu Oct 04, 2018 11:12 pm

Bingo. My youngest flipped it.

Khrolar
Posts: 16
Joined: Thu Aug 09, 2018 4:27 pm
Member's Photo Album: http://www.delica.ca/Photos/VD
Vehicle: 1994 L400, LWB, Super Exceed
Location: Victoria

Can’t open sliding door from the inside on my L300. Outside is fine.

Postby Khrolar » Fri Oct 05, 2018 9:01 am

Ahhh, the old child lock! Gets people every time!

Sent from my SM-G930W8 using Tapatalk

User avatar
Growlerbearnz
Posts: 1885
Joined: Sat Jun 26, 2010 1:58 pm
Member's Photo Album: http://www.delica.ca/Photos/
Vehicle: Delica P25W
Location: New Zealand

Can’t open sliding door from the inside on my L300. Outside is fine.

Postby Growlerbearnz » Sun Oct 07, 2018 7:41 pm

north54 wrote:Child safety switch on?


LOL!! We've all done this at least once. :-)
Nothing says "poor workmanship" more than wrinkles in the duct tape.


Return to “L300 Technical”

Who is online

Users browsing this forum: north54 and 6 guests