Filling the transfer case

Does your Mitsubishi L300 make a strange noise? Need wheel alignment specs?
Post Reply
nenw
Posts: 9
Joined: Sat Apr 23, 2016 11:32 am
Member's Photo Album: http://www.delica.ca/Photos/
Vehicle: VW Jetta
Location: Seattle

Filling the transfer case

Post by nenw »

Hey all this should be an easy question. I know the capacity chart for the transfer case says 2.2 liters.
When it gets to capacity will it be level with the filler hole just like when you fill a differential or do I need to be sure to know exactly how much is going in?
User avatar
Growlerbearnz
Posts: 2041
Joined: Sat Jun 26, 2010 1:58 pm
Member's Photo Album: http://www.delica.ca/Photos/
Vehicle: Delica P25W
Location: New Zealand

Filling the transfer case

Post by Growlerbearnz »

Same as a differential- fill it until it starts to dribble back out the filler hole.
Nothing says "poor workmanship" more than wrinkles in the duct tape.
nenw
Posts: 9
Joined: Sat Apr 23, 2016 11:32 am
Member's Photo Album: http://www.delica.ca/Photos/
Vehicle: VW Jetta
Location: Seattle

Filling the transfer case

Post by nenw »

Perfect..thanks!
Post Reply

Return to “L300 Technical”