Say you just lifted your L300

Does your Mitsubishi L300 make a strange noise? Need wheel alignment specs?
Post Reply
djxtreme
Posts: 6
Joined: Thu Jun 07, 2018 2:51 pm
Member's Photo Album: http://www.delica.ca/Photos/
Vehicle: none yet
Location: SLC, UT, USA

Say you just lifted your L300

Post by djxtreme »

Fresh 2” lift on an L300

What (Black) rims and tires do you buy?

....GO!
User avatar
Growlerbearnz
Posts: 2041
Joined: Sat Jun 26, 2010 1:58 pm
Member's Photo Album: http://www.delica.ca/Photos/
Vehicle: Delica P25W
Location: New Zealand

Say you just lifted your L300

Post by Growlerbearnz »

blackrock_909b_15x8.png
blackrock_909b_15x8.png (289.86 KiB) Viewed 5651 times
Mmm Black Rock 909-B. A pity they don't come in 16" though, because my next set of tyres will be 235/85R16.
Nothing says "poor workmanship" more than wrinkles in the duct tape.
User avatar
javabob
Posts: 71
Joined: Thu Feb 04, 2016 11:14 pm
Member's Photo Album: http://www.delica.ca/Photos/
Vehicle: 1991 Exceed (P35W)
Location: Minneapolis

Say you just lifted your L300

Post by javabob »

I have these:
American Racing Baja
American Racing Baja
deli-wheels.jpg (230.39 KiB) Viewed 5628 times
For tires I have Goodyear Wrangler DuraTrac LT235/85R16
A common mistake that people make when trying to design something completely foolproof is to underestimate the ingenuity of complete fools.
djxtreme
Posts: 6
Joined: Thu Jun 07, 2018 2:51 pm
Member's Photo Album: http://www.delica.ca/Photos/
Vehicle: none yet
Location: SLC, UT, USA

Say you just lifted your L300

Post by djxtreme »

Great, thanks. What’s our bolt pattern?
And your 235/85, is that with a lift?
sk66
Posts: 189
Joined: Thu Oct 06, 2016 3:24 pm
Member's Photo Album: http://www.delica.ca/Photos/
Vehicle: '91 Delica L300
Location: Pennsylvania, USA

Say you just lifted your L300

Post by sk66 »

djxtreme wrote:Great, thanks. What’s our bolt pattern?
6x5.5
I would expect 235/85-16's to be a tight fit even w/ a 2" lift... no way they fit w/o one.
Steven
1991 L300
Harrisburg, PA
User avatar
Growlerbearnz
Posts: 2041
Joined: Sat Jun 26, 2010 1:58 pm
Member's Photo Album: http://www.delica.ca/Photos/
Vehicle: Delica P25W
Location: New Zealand

Say you just lifted your L300

Post by Growlerbearnz »

The centre hole is unusually large. I'm guessing you didn't notice this post in the Technical Reference Library: http://www.delica.ca/forum/viewtopic.php?f=96&t=18250
Nothing says "poor workmanship" more than wrinkles in the duct tape.
User avatar
javabob
Posts: 71
Joined: Thu Feb 04, 2016 11:14 pm
Member's Photo Album: http://www.delica.ca/Photos/
Vehicle: 1991 Exceed (P35W)
Location: Minneapolis

Say you just lifted your L300

Post by javabob »

djxtreme wrote:And your 235/85, is that with a lift?
No lift, but I had to remove the front steps and "modify" the front arch a bit.
A common mistake that people make when trying to design something completely foolproof is to underestimate the ingenuity of complete fools.
djxtreme
Posts: 6
Joined: Thu Jun 07, 2018 2:51 pm
Member's Photo Album: http://www.delica.ca/Photos/
Vehicle: none yet
Location: SLC, UT, USA

Say you just lifted your L300

Post by djxtreme »

so those American racing rims are 16x8? because I thought 16x8 was too wide...?
djxtreme
Posts: 6
Joined: Thu Jun 07, 2018 2:51 pm
Member's Photo Album: http://www.delica.ca/Photos/
Vehicle: none yet
Location: SLC, UT, USA

Say you just lifted your L300

Post by djxtreme »

I've ordered the 235/85/16 KO2's, now just need to find pretty much any black rim that'll fit...
Post Reply

Return to “L300 Technical”