Missing Tire Kit

Does your Mitsubishi L300 make a strange noise? Need wheel alignment specs?
User avatar
F0urEvrCaR22
Posts: 29
Joined: Sun Sep 03, 2017 9:06 am
Member's Photo Album: http://www.delica.ca/Photos/
Vehicle: 1993 L300 Exceed Star Wagon Turbo D
Location: Japan

Missing Tire Kit

Postby F0urEvrCaR22 » Mon Jan 01, 2018 5:37 am

Happy New Year Friends,

I checked my Deli (in the right place) and I noted that the OEM tool kit was gone :o . Does anyone have any recommendations on a replacement jack? :?

User avatar
Lapprentis
Posts: 334
Joined: Sat Dec 28, 2013 6:02 pm
Member's Photo Album: http://www.delica.ca/Photos/
Vehicle: Delica L300 StarWagon 1990
Location: Quebec

Missing Tire Kit

Postby Lapprentis » Mon Jan 01, 2018 10:03 am

Look for any parting out L300 on the advertized and you will find an original jack/tools. i do not know about in Japan but common here in Canada. Used internet searching tool : google, etc

Lapprentis :M

User avatar
NewDelica91
Posts: 96
Joined: Thu Apr 20, 2017 2:20 pm
Member's Photo Album: http://www.delica.ca/Photos/
Vehicle: 1991 Delica L300
Location: Edmonton, AB

Missing Tire Kit

Postby NewDelica91 » Mon Jan 01, 2018 10:31 am

Try these links (see below). When I got my Exceed the kit was missing as well but it had been mostly replaced by local kit. A bottle jack and a 4 point tire iron. The remaining tools (screwdriver and wrench set) I picked up at Canadian Tire. Hopefully, you can get what you are looking for.


https://www.catalogs.ssg.asia/mitsubishi/?lang=en
https://www.megazip.net/
For this link enter your body number and it will match up to your vehicle. Also, I used this site to buy the weather seal for my sunroof. (https://www.amayama.com/en) I found later I could've gone to Greggs for the part but I learned.
Written from underneath my Delica, just kidding!

User avatar
feetforbrains
Posts: 73
Joined: Sun Sep 17, 2017 10:59 am
Member's Photo Album: http://www.delica.ca/Photos/
Vehicle: 1991 Delica L300 Chamonix
Location: US

Missing Tire Kit

Postby feetforbrains » Wed Jan 03, 2018 4:13 pm

Because the lift points are so far under the front I carry a 12 ton pump jack. Check you lift point clearances with your tire size and then get something that will fit and extend at 10 cm above resting point. More is better

Sent from my Pixel 2 using Tapatalk

User avatar
F0urEvrCaR22
Posts: 29
Joined: Sun Sep 03, 2017 9:06 am
Member's Photo Album: http://www.delica.ca/Photos/
Vehicle: 1993 L300 Exceed Star Wagon Turbo D
Location: Japan

Missing Tire Kit

Postby F0urEvrCaR22 » Wed Jan 10, 2018 6:09 am

Thanks for the info,

My intent is to switch to "Yokohama Geolander A/T (P253/75R15/108T/XL). Also, I intend to raise it about 3" in the future. So, the OEM Bottle Jack seem like it may not do the job. So, looking for something that is as close to being "future-proof" as possible, and something I can carry around in my car. What about this thing:

Powerbuilt 640912 All-In-One 3-Ton Bottle Jack with Jack Stand
https://www.amazon.com/Powerbuilt-64091 ... LZGFU?th=1


Return to “L300 Technical”

Who is online

Users browsing this forum: Majestic-12 [Bot] and 6 guests