crankshaft main seal and output shaft seal

Does your Mitsubishi L300 make a strange noise? Need wheel alignment specs?
Post Reply
thesixpackcaptain
Posts: 8
Joined: Thu Nov 16, 2017 11:37 pm
Member's Photo Album: http://www.delica.ca/Photos/
Vehicle: 1992 super exceed
Location: lower mainland

crankshaft main seal and output shaft seal

Post by thesixpackcaptain »

Hi all! I've been an L300 driver for the past 6 years and have gleaned sooo much helpful info from this site and am finally posting a question.Thank you all.
I'm doing a transmission change on my L300 and I'm looking for the part numbers for the crankshaft seal and the transmission output shaft seal. In the past I found a list from LORDCO that someone had posted which was a great source when I did my front end rebuild and shocks etc.....

any help from the lower mainland would be appreciated !

Have had amazing experiences in our Deli and look forward to more with a fresh trans. in her!

TIA Tim in PoMo
zapizoid
Posts: 9
Joined: Mon Oct 02, 2017 4:31 pm
Member's Photo Album: http://www.delica.ca/Photos/
Vehicle: 1993 L300 Super Exceed
Location: Olds AB

crankshaft main seal and output shaft seal

Post by zapizoid »

Post Reply

Return to “L300 Technical”