Hi I have had my Delica off the road for a bit and it is time to get her up and running again.
Problem, I took off my fusable links as they needed replacing and now that I am replacing them I forget how they were attached... which one goes where.
Anyone with a SINGLE battery hookup able to post pictures?
cheers
Fusable Link Wiring
-
dfnder
- Posts: 526
- Joined: Wed Mar 05, 2008 9:36 pm
- Member's Photo Album: http://www.delica.ca/Photos/
- Vehicle: '91 Exceed
- Location: Squamish
-
Erebus
- Posts: 1369
- Joined: Mon May 28, 2007 7:55 pm
- Member's Photo Album: http://www.delica.ca/Photos/
- Vehicle: 1992 Super Exceed
- Location: Edmonton, Alberta
- Location: Edmonton (was Calgary until 2017), Alberta, Canada
- Contact:
Re: Fusable Link Wiring
Sorry, I don't have any pictures of my single battery setup. But it is a Group27, turned sideways from the way the 2-battery setup was. Positive on driver's side.
I gotta do something about my fusible links too, one of them is stretched pretty tight.
I gotta do something about my fusible links too, one of them is stretched pretty tight.
"I could be just around the corner from heaven, or a mile from hell." -- Jackson Browne, "The road and the sky".-
dfnder
- Posts: 526
- Joined: Wed Mar 05, 2008 9:36 pm
- Member's Photo Album: http://www.delica.ca/Photos/
- Vehicle: '91 Exceed
- Location: Squamish
Re: Fusable Link Wiring
I got it figured out, I had a close look at a dual setup at CVI and then went back and hooked mine up. No sparks YEAH!!
My Van started first crank after sitting for 20 months.
My Van started first crank after sitting for 20 months.