Anyone else besides Reinhold and myself getting one of the skidplates?
Trying to see if someone is going that way who could pick them up or do a bulk shipment or something.
Rod
skidplates
-
- Posts: 167
- Joined: Thu Jun 19, 2008 9:19 pm
- Member's Photo Album: http://www.delica.ca/Photos/
- Vehicle: 93 Exceed
- Location: Calgary, Alberta
- Erebus
- Posts: 1369
- Joined: Mon May 28, 2007 7:55 pm
- Member's Photo Album: http://www.delica.ca/Photos/
- Vehicle: 1992 Super Exceed
- Location: Edmonton, Alberta
- Location: Edmonton (was Calgary until 2017), Alberta, Canada
- Contact:
Re: skidplates
Erebus and Jungle Jon, both in Calgary, have also got one. So we need transport for 4 of them from Vancouver area to Alberta (3 to Calgary, 1 to Edmonton).
"I could be just around the corner from heaven, or a mile from hell." -- Jackson Browne, "The road and the sky".
- Golf Cart
- Posts: 857
- Joined: Tue Jul 15, 2008 10:57 pm
- Member's Photo Album: http://www.delica.ca/Photos/
- Vehicle: 1992 Exceed
- Location: Maple Ridge
Re: skidplates
Greydog would be cheap
By the time you realize that my signature has no real message or life altering words of wisdom, you're too far into it to stop reading until you are finished
- Erebus
- Posts: 1369
- Joined: Mon May 28, 2007 7:55 pm
- Member's Photo Album: http://www.delica.ca/Photos/
- Vehicle: 1992 Super Exceed
- Location: Edmonton, Alberta
- Location: Edmonton (was Calgary until 2017), Alberta, Canada
- Contact:
Re: skidplates
Even for something as big and bulky as the skidplates? If so, ya, let's send the 4 Alberta ones that way, we can split the cost 4 ways, and I can deliver the Edmonton one at the end of the month.Golf Cart wrote:Greydog would be cheap
You can send them to me. PM me for address, etc.
"I could be just around the corner from heaven, or a mile from hell." -- Jackson Browne, "The road and the sky".
-
- Posts: 2
- Joined: Thu Jan 29, 2009 10:58 pm
- Member's Photo Album: http://www.delica.ca/Photos/
- Vehicle: 1993 Mitsubishi Delica Exceed
- Location: Calgary, Alberta
Re: skidplates
Hello,
I just joined the club..............this will be my first post.
Am i too late to get in on the skidplates coming to Calgary?
Thanks in advance
BTW, this is a marvelous site.
I have learned so much since i got my ride in July.
From replacing the radio, speakers, block heaters and even fixing the wobble in one of the chairs.
I just joined the club..............this will be my first post.
Am i too late to get in on the skidplates coming to Calgary?
Thanks in advance
BTW, this is a marvelous site.
I have learned so much since i got my ride in July.
From replacing the radio, speakers, block heaters and even fixing the wobble in one of the chairs.
- delicat
- Posts: 2331
- Joined: Thu Jul 26, 2007 6:26 pm
- Member's Photo Album: http://www.delica.ca/Photos/
- Vehicle: '92 Exeed '93 Safari '94 Pajero
- Location: New Westminster, BC
- Location: New Westminster, BC
Re: skidplates
Oups, I think you missed out!
The plates have already been shipped. Check with Fishslapper, I think he's got another batch brewing...
The plates have already been shipped. Check with Fishslapper, I think he's got another batch brewing...
'93 Nissan Patrol
'94 Mitsubishi Pajero
"If it ain't broken, modify it!"
'94 Mitsubishi Pajero
"If it ain't broken, modify it!"
- Erebus
- Posts: 1369
- Joined: Mon May 28, 2007 7:55 pm
- Member's Photo Album: http://www.delica.ca/Photos/
- Vehicle: 1992 Super Exceed
- Location: Edmonton, Alberta
- Location: Edmonton (was Calgary until 2017), Alberta, Canada
- Contact:
Re: skidplates
Yup, the shipment for Calgary arrived on Wed, and is partially distributed already. Welcome to the forum. You should have joined earlier <smile>, you could have met all us incredibly wonderful people (can you tell I'm modest?), participated in the Calgary area meet in October, etc.bbtbby wrote:I just joined the club..............this will be my first post.
Am i too late to get in on the skidplates coming to Calgary?
But you are here now. You'll have to wait for the next batch of 'plates, that I'm thinking will happen, given the interest. And since the very hard work of getting the exact design is now done, producing more is (relatively) easy.
BTW might I suggest you modify your profile to show where you live. Makes everyone's life easier when you post and write something about "here" without specifying where "here" is -- not that I have ever done that, nope I'll deny it despite the evidence to the contrary
"I could be just around the corner from heaven, or a mile from hell." -- Jackson Browne, "The road and the sky".