Hello From Chile!

New to Delica Canada? Please introduce yourself and your van!
Post Reply
DNAngel
Posts: 2
Joined: Sat Aug 20, 2016 2:33 pm
Member's Photo Album: http://www.delica.ca/Photos/
Vehicle: L300 Delica
Location: Chile

Hello From Chile!

Post by DNAngel »

Hello friends.
Greetings from Chile!

This is my Mitsubishi L300 4x4, European version, which once brought the official importer in 1990.

As you can see, the rescue from a field, near my city Santiago.
I am in the process of equipping it and leaving it with all the extra accessories possible.
It is already painted and I pass the technical tests to be able to circulate legally.
Originally it brought the 2.0 gasoline engine, which was changed by a 4D56 Turbo.

I hope to share with you all the modifications that I am making, of which, many have been taken from this forum, and they have been of great help to me.

Regards!
Attachments
IMG-20171119-WA0030.jpg
IMG-20171119-WA0030.jpg (374.79 KiB) Viewed 3068 times
IMG-20180205-WA0015.jpg
IMG-20180205-WA0015.jpg (508.42 KiB) Viewed 3068 times
IMG-20171119-WA0022.jpg
IMG-20171119-WA0022.jpg (385.03 KiB) Viewed 3068 times
IMG-20171119-WA0023.jpg
IMG-20171119-WA0023.jpg (356.13 KiB) Viewed 3068 times
User avatar
Lapprentis
Posts: 357
Joined: Sat Dec 28, 2013 6:02 pm
Member's Photo Album: http://www.delica.ca/Photos/
Vehicle: Delica L300 StarWagon 1990
Location: Quebec

Hello From Chile!

Post by Lapprentis »

Hola ! Welcome aboard ! Will the front Bull bars (front bumper) fits ? Or you may only need to drill holes ? Was it very rusty under ?

Lapprentis :M
Last edited by Lapprentis on Sun Mar 25, 2018 3:48 pm, edited 1 time in total.
DNAngel
Posts: 2
Joined: Sat Aug 20, 2016 2:33 pm
Member's Photo Album: http://www.delica.ca/Photos/
Vehicle: L300 Delica
Location: Chile

Hello From Chile!

Post by DNAngel »

Hello!
It is the original Bull bars, it has its own supports, you do not have to drill anything.
It only had superficial oxide in some places. It was in very good condition of chassis.
Regards!
Post Reply

Return to “Member Introductions”