Hello friends.
Greetings from Chile!
This is my Mitsubishi L300 4x4, European version, which once brought the official importer in 1990.
As you can see, the rescue from a field, near my city Santiago.
I am in the process of equipping it and leaving it with all the extra accessories possible.
It is already painted and I pass the technical tests to be able to circulate legally.
Originally it brought the 2.0 gasoline engine, which was changed by a 4D56 Turbo.
I hope to share with you all the modifications that I am making, of which, many have been taken from this forum, and they have been of great help to me.
Regards!
Hello From Chile!
-
- Posts: 2
- Joined: Sat Aug 20, 2016 2:33 pm
- Member's Photo Album: http://www.delica.ca/Photos/
- Vehicle: L300 Delica
- Location: Chile
Hello From Chile!
- Attachments
-
- IMG-20171119-WA0030.jpg (374.79 KiB) Viewed 3069 times
-
- IMG-20180205-WA0015.jpg (508.42 KiB) Viewed 3069 times
-
- IMG-20171119-WA0022.jpg (385.03 KiB) Viewed 3069 times
-
- IMG-20171119-WA0023.jpg (356.13 KiB) Viewed 3069 times
- Lapprentis
- Posts: 357
- Joined: Sat Dec 28, 2013 6:02 pm
- Member's Photo Album: http://www.delica.ca/Photos/
- Vehicle: Delica L300 StarWagon 1990
- Location: Quebec
Hello From Chile!
Hola ! Welcome aboard ! Will the front Bull bars (front bumper) fits ? Or you may only need to drill holes ? Was it very rusty under ?
Lapprentis
Lapprentis
Last edited by Lapprentis on Sun Mar 25, 2018 3:48 pm, edited 1 time in total.
-
- Posts: 2
- Joined: Sat Aug 20, 2016 2:33 pm
- Member's Photo Album: http://www.delica.ca/Photos/
- Vehicle: L300 Delica
- Location: Chile
Hello From Chile!
Hello!
It is the original Bull bars, it has its own supports, you do not have to drill anything.
It only had superficial oxide in some places. It was in very good condition of chassis.
Regards!
It is the original Bull bars, it has its own supports, you do not have to drill anything.
It only had superficial oxide in some places. It was in very good condition of chassis.
Regards!