Delica Canada | Mitsubishi Van Club

My 95 L400 Diesel came without a manual throttle adjust. When I preheat my engine with my espar heater and then start it, the engine idles too low, causing a lot of vibrations during warmup. I decided to build my own. I let the pictures speak for themselves. Let me know if you figured out a better solution.[img]https://uploads.tapatalk-cdn.com/201711 ... 8f1ddf.jpg[/img][img]https://uploads.tapatalk-cdn.com/201711 ... bee268.jpg[/img][img]https://uploads.tapatalk-cdn.com/201711 ... 0e8bb1.jpg[/img][img]https://uploads.tapatalk-cdn.com/201711 ... 50fd8d.jpg[/img][img]https://uploads.tapatalk-cdn.com/201711 ... 8aad64.jpg[/img]

Sent from my SM-G920W8 using Tapatalk

Looks pretty good. You could modify some sort of plastic knob to fit over the wing nut with the edges trimmed. You could probably find a stock unit at a wrecker too.

Sent from my SGH-T999V using Tapatalk

Man I didn't realize the throttle adjust was that simple! Definitely going to build my own now!
Might use one of these instead of the wing nut though...