Apologies if this is a repeat question (or posted in the wrong spot)! I've tried to do my due diligence by searching the site first, but I couldn't find any recent posts on this topic.
Can anybody recommend a shop to have my bull bar (and other bars) sandblasted and powder coated? I live in Vancouver but am fine travelling to Surrey/Langley/etc. for a good place.
I'm planning to remove the bars myself before handing them over to professionals for sandblasting/powder coating. Or at least I'm going to try to.
Thanks in advance!
Looking for recommendation for powder coating shop
Moderator: BCDelica
-
- Posts: 10
- Joined: Sat Feb 25, 2017 8:39 pm
- Member's Photo Album: http://www.delica.ca/Photos/
- Vehicle: Delica L300
- Location: Vancouver
-
- Posts: 186
- Joined: Sat Jun 25, 2011 12:52 pm
- Member's Photo Album: http://www.delica.ca/Photos/
- Vehicle: 1999 L400 Chamonix Gen2
- Location: vancouver
- Location: Vancouver
Looking for recommendation for powder coating shop
Rainbow Powder Coating in Coquitlam right by the Ikea. He's very good.
Sent from my SM-G920W8 using Tapatalk
Sent from my SM-G920W8 using Tapatalk
-
- Posts: 10
- Joined: Sat Feb 25, 2017 8:39 pm
- Member's Photo Album: http://www.delica.ca/Photos/
- Vehicle: Delica L300
- Location: Vancouver
Looking for recommendation for powder coating shop
Fantastic - thank you very much!
Rainbow came up in my initial google search, and I was going to try to find out more about them. Great to know they come recommended.
Rainbow came up in my initial google search, and I was going to try to find out more about them. Great to know they come recommended.
-
- Posts: 186
- Joined: Sat Jun 25, 2011 12:52 pm
- Member's Photo Album: http://www.delica.ca/Photos/
- Vehicle: 1999 L400 Chamonix Gen2
- Location: vancouver
- Location: Vancouver
Looking for recommendation for powder coating shop
I've never had him do anything on my Delica, but he's done a bike frame for me that was amazing. He's been around since Christ was a cowboy and has the set up to handle anything. Good luck and post some pics once it's done if you can.
Sent from my SM-G920W8 using Tapatalk
Sent from my SM-G920W8 using Tapatalk
-
- Posts: 65
- Joined: Mon May 25, 2009 3:51 pm
- Member's Photo Album: http://www.delica.ca/Photos/
- Vehicle: '90 delica exceed
- Location: Squamish BC
- Location: Squamish
Looking for recommendation for powder coating shop
I've been wanting to get some stuff sandblasted too. What kind of cost are we looking at for blasting and powder coating. I want to get my rims and a roof rack done. Anyone have any insight into this?
-
- Posts: 186
- Joined: Sat Jun 25, 2011 12:52 pm
- Member's Photo Album: http://www.delica.ca/Photos/
- Vehicle: 1999 L400 Chamonix Gen2
- Location: vancouver
- Location: Vancouver
Looking for recommendation for powder coating shop
Not sure on cost, but if you call Rainbow I'm sure he'll be able to give you a ballpark.
Sent from my SM-G920W8 using Tapatalk
Sent from my SM-G920W8 using Tapatalk
-
- Posts: 10
- Joined: Sat Feb 25, 2017 8:39 pm
- Member's Photo Album: http://www.delica.ca/Photos/
- Vehicle: Delica L300
- Location: Vancouver
Looking for recommendation for powder coating shop
Thanks, poochike! Yes, pics will be posted as soon as I can get the work done.