Front skid plates for sale, interested?

Mitsubishi Delica Camper vans, lift kits & other Delica Accessories!

Moderator: BCDelica

Mr.SA
Posts: 43
Joined: Wed Mar 02, 2016 10:40 am
Member's Photo Album: http://www.delica.ca/Photos/
Vehicle: Delica L300
Location: Denver

Front skid plates for sale, interested?

Postby Mr.SA » Tue Aug 22, 2017 10:35 am

I'm getting a front skid made, using the drawing from this page...
http://www.delica.ca/forum/viewtopic.ph ... e&start=30

Thinking we'll do a run of 8 of them, if anyone is interested let me know, and what kind of transmission, AT or Manual. also if anyone has input on what material, alu vs steel, and what thickness you'd want, hopefully we can use a material/thickness that would work for everyone.

User avatar
Crankshaft Culture
Posts: 57
Joined: Tue Jun 20, 2017 11:07 am
Member's Photo Album: http://www.delica.ca/Photos/
Vehicle: 1989 Delica
Location: Portland, OR
Contact:

Front skid plates for sale, interested?

Postby Crankshaft Culture » Tue Aug 22, 2017 10:51 am

I might be interested in a steel one. However, it depends on price.

Mr.SA
Posts: 43
Joined: Wed Mar 02, 2016 10:40 am
Member's Photo Album: http://www.delica.ca/Photos/
Vehicle: Delica L300
Location: Denver

Front skid plates for sale, interested?

Postby Mr.SA » Tue Aug 22, 2017 11:51 am

Price I'm thinking will be around 200, depends on material and how much it'll cost to get them cut.

jesseydearing
Posts: 5
Joined: Fri Jul 21, 2017 9:36 pm
Member's Photo Album: http://www.delica.ca/Photos/
Vehicle: 1991 L300 P35W Super Exceed
Location: Seattle
Location: Seattle, Washington

Front skid plates for sale, interested?

Postby jesseydearing » Fri Sep 22, 2017 1:55 pm

I would be interested in one for a 1991 automatic L300. Aluminum would be fine for me. Any idea on price / interests yet?
1991 L300 P35W Super Exceed

Mr.SA
Posts: 43
Joined: Wed Mar 02, 2016 10:40 am
Member's Photo Album: http://www.delica.ca/Photos/
Vehicle: Delica L300
Location: Denver

Front skid plates for sale, interested?

Postby Mr.SA » Tue Sep 26, 2017 8:47 am

Ok we've got our first two made, these are for a manual, since I can't test fit them, I'll sell for 150, though just holding up to my van it looks like it would fit really well. The bends match up perfectly to the drawings. I just have the front end of mine taken apart so can't actually fit it.

Message me if interested.

Also, after looking at it a bit, we're thinking of making a new two piece design that would have some cross bars that tie into the frame, then continues quite a ways further back. It would also completely illuminate the stock under engine pans or whatever those things are called? Hoping to have a design within a couple weeks.

We can still see these skids, but from here on out we may need to get the orders ahead of time to cover the cost of material since we'll be focusing on the other version.
FullSizeRender.jpg
FullSizeRender.jpg (121.27 KiB) Viewed 582 times

Stella87
Posts: 26
Joined: Sun Dec 25, 2016 10:07 am
Member's Photo Album: http://www.delica.ca/Photos/
Vehicle: Mitsubishi Delica L300 P35W
Location: Flagstaff, Arizona

Front skid plates for sale, interested?

Postby Stella87 » Fri Sep 29, 2017 11:32 pm

Interested! 1991 automatic as well, where are these being made? Post up a sketch of the two piece design if you get a chance
"Delilah" 91 L300 P35W Exceed

Mr.SA
Posts: 43
Joined: Wed Mar 02, 2016 10:40 am
Member's Photo Album: http://www.delica.ca/Photos/
Vehicle: Delica L300
Location: Denver

Front skid plates for sale, interested?

Postby Mr.SA » Sun Oct 01, 2017 8:15 pm

Stella87 wrote:Interested! 1991 automatic as well, where are these being made? Post up a sketch of the two piece design if you get a chance


In Colorado, my friends company makes jeep parts, we're doing it in his shop. The two piece thing COULD take awhile to get to a point where we have a design we could sell. it'll be a bit more involved.

We can definitely make a lot more of these skids for now though. I'm waiting till we get 4 interested people total till we make a run of skids for an auto l300. We're at two now.

P.Gaudreault
Posts: 98
Joined: Thu Sep 18, 2014 8:57 am
Member's Photo Album: http://www.delica.ca/Photos/
Vehicle: Mitsubishi Delica 1998 Chamonix
Location: Cherry Grove, Ab

Front skid plates for sale, interested?

Postby P.Gaudreault » Wed Oct 11, 2017 11:23 am

Is there a drawing for a L400 skin plate. I have never find one..

jesseydearing
Posts: 5
Joined: Fri Jul 21, 2017 9:36 pm
Member's Photo Album: http://www.delica.ca/Photos/
Vehicle: 1991 L300 P35W Super Exceed
Location: Seattle
Location: Seattle, Washington

Front skid plates for sale, interested?

Postby jesseydearing » Tue Nov 07, 2017 11:17 pm

Just checking to see if you had made anymore skid plates or had any others interested?

Cheers,

Jessey
1991 L300 P35W Super Exceed

Mr.SA
Posts: 43
Joined: Wed Mar 02, 2016 10:40 am
Member's Photo Album: http://www.delica.ca/Photos/
Vehicle: Delica L300
Location: Denver

Front skid plates for sale, interested?

Postby Mr.SA » Thu Nov 09, 2017 12:11 pm

jesseydearing wrote:Just checking to see if you had made anymore skid plates or had any others interested?

Cheers,

Jessey


I still have one for a manual ready to ship.

Im trying to get a run of autos made, we're doing them at a friends shop as time allows, Im thinking sometime in the next week we should have them made but i cant guarantee it.

manitoba
Posts: 14
Joined: Mon Aug 21, 2017 8:06 pm
Member's Photo Album: http://www.delica.ca/Photos/
Vehicle: L400
Location: winnipeg

Front skid plates for sale, interested?

Postby manitoba » Fri Nov 17, 2017 10:00 pm

I just got my '98 L400 v6 auto the other day and am thinking of adding a skid plate. If this is compatible I would love to be kept in the loop :-D


Return to “Delica Modifications”

Who is online

Users browsing this forum: No registered users and 3 guests