Delica Canada | Mitsubishi Van Club

I'm getting a front skid made, using the drawing from this page...
http://www.delica.ca/forum/viewtopic.ph ... e&start=30

Thinking we'll do a run of 8 of them, if anyone is interested let me know, and what kind of transmission, AT or Manual. also if anyone has input on what material, alu vs steel, and what thickness you'd want, hopefully we can use a material/thickness that would work for everyone.

I might be interested in a steel one. However, it depends on price.

Price I'm thinking will be around 200, depends on material and how much it'll cost to get them cut.

I would be interested in one for a 1991 automatic L300. Aluminum would be fine for me. Any idea on price / interests yet?

Ok we've got our first two made, these are for a manual, since I can't test fit them, I'll sell for 150, though just holding up to my van it looks like it would fit really well. The bends match up perfectly to the drawings. I just have the front end of mine taken apart so can't actually fit it.

Message me if interested.

Also, after looking at it a bit, we're thinking of making a new two piece design that would have some cross bars that tie into the frame, then continues quite a ways further back. It would also completely illuminate the stock under engine pans or whatever those things are called? Hoping to have a design within a couple weeks.

We can still see these skids, but from here on out we may need to get the orders ahead of time to cover the cost of material since we'll be focusing on the other version.

Interested! 1991 automatic as well, where are these being made? Post up a sketch of the two piece design if you get a chance

Stella87 wrote:Interested! 1991 automatic as well, where are these being made? Post up a sketch of the two piece design if you get a chance

In Colorado, my friends company makes jeep parts, we're doing it in his shop. The two piece thing COULD take awhile to get to a point where we have a design we could sell. it'll be a bit more involved.

We can definitely make a lot more of these skids for now though. I'm waiting till we get 4 interested people total till we make a run of skids for an auto l300. We're at two now.

Is there a drawing for a L400 skin plate. I have never find one..

Just checking to see if you had made anymore skid plates or had any others interested?

Cheers,

Jessey

jesseydearing wrote:Just checking to see if you had made anymore skid plates or had any others interested?

Cheers,

Jessey

I still have one for a manual ready to ship.

Im trying to get a run of autos made, we're doing them at a friends shop as time allows, Im thinking sometime in the next week we should have them made but i cant guarantee it.

I just got my '98 L400 v6 auto the other day and am thinking of adding a skid plate. If this is compatible I would love to be kept in the loop

I gots a 2000 L400 auto V6, would be interested too!

Wow that looks nice! I'd also be interested if it fits a 1997 L400 automatic. Let me know! Thanks!

I'd be interested in a Alum version for a 92 L300 auto.