Fiamma Bike Rack

Mitsubishi Delica Camper vans, lift kits & other Delica Accessories!

Moderator: BCDelica

Post Reply
philmeup1
Posts: 515
Joined: Wed Aug 22, 2012 6:20 am
Member's Photo Album: http://www.delica.ca/Photos/
Vehicle: 1992 Delica
Location: Ontario

Fiamma Bike Rack

Post by philmeup1 »

Hello folks,
Just thought I'd share with you a fantastic little mid I did to my L300 today. It's bit really even a mod because it was too easy.

Anyway, I was looking at a VW Eurovan with a fiamma bike rack attached to the rear hatch and thought, I bet this would almost bolt right on to the rear hatch of a Delica L300. These racks are custom made in Italy out of Aluminum to hard mount to specific vehicles. I had one on my '79 Westy and it was the bomb.

So I found a used one and bought it to see if it would work. And it did, like it was meant to fit this vehicle from the factory. I'm thrilled with the results and how simple it was to install. Go Westy sells new ones, but they're not cheap. Used ones come up from time to time, and that's how I found mine. I wish I knew how to add photos so you could see what I'm talking about, but I've never been able to figure out how to do this on here:(

Anyway, just thought I'd share this with everyone. Really looking forward to camping season.

Cheers, Phil
User avatar
feetforbrains
Posts: 73
Joined: Sun Sep 17, 2017 10:59 am
Member's Photo Album: http://www.delica.ca/Photos/
Vehicle: 1991 Delica L300 Chamonix
Location: US

Fiamma Bike Rack

Post by feetforbrains »

philmeup1 wrote:Hello folks,
Just thought I'd share with you a fantastic little mid I did to my L300 today. It's bit really even a mod because it was too easy.

Anyway, I was looking at a VW Eurovan with a fiamma bike rack attached to the rear hatch and thought, I bet this would almost bolt right on to the rear hatch of a Delica L300. These racks are custom made in Italy out of Aluminum to hard mount to specific vehicles. I had one on my '79 Westy and it was the bomb.

So I found a used one and bought it to see if it would work. And it did, like it was meant to fit this vehicle from the factory. I'm thrilled with the results and how simple it was to install. Go Westy sells new ones, but they're not cheap. Used ones come up from time to time, and that's how I found mine. I wish I knew how to add photos so you could see what I'm talking about, but I've never been able to figure out how to do this on here:(

Anyway, just thought I'd share this with everyone. Really looking forward to camping season.

Cheers, Phil
Phil,

Can you take some pictures?

Sent from my Nexus 6P using Tapatalk
philmeup1
Posts: 515
Joined: Wed Aug 22, 2012 6:20 am
Member's Photo Album: http://www.delica.ca/Photos/
Vehicle: 1992 Delica
Location: Ontario

Fiamma Bike Rack

Post by philmeup1 »

Hi feetforbrains,

I've never been able to figure out how to post pictures on this site unfortunately. If you PM me your email, I could probably send you a photo that way. I can tell you this, it's the best mod I've done on my van. Google Fiamma Bike Rack for Volkswagen Eurovan. If you look at the images, you'll see how similar both rear tailgates are. It's the easiest way to mount bikes on the rear of your Delica.

Cheers, Phil
User avatar
Lapprentis
Posts: 357
Joined: Sat Dec 28, 2013 6:02 pm
Member's Photo Album: http://www.delica.ca/Photos/
Vehicle: Delica L300 StarWagon 1990
Location: Quebec

Fiamma Bike Rack

Post by Lapprentis »

Seems to fits many Vans/Buses including VW Bus, Vanagon, Eurovan :)

Lapprentis :M
Attachments
Unknown.jpeg
Unknown.jpeg (7.08 KiB) Viewed 6345 times
screenshot_159.png
screenshot_159.png (157.78 KiB) Viewed 6345 times
philmeup1
Posts: 515
Joined: Wed Aug 22, 2012 6:20 am
Member's Photo Album: http://www.delica.ca/Photos/
Vehicle: 1992 Delica
Location: Ontario

Fiamma Bike Rack

Post by philmeup1 »

Yes, and the beautiful thing is that it fits the rear of an L300 just like the red Eurovan in the picture. It looks as though it was manufactured to fit on the rear of our vans. Best mod I've done yet!!
sealica
Posts: 148
Joined: Mon Aug 08, 2016 5:38 pm
Member's Photo Album: http://www.delica.ca/Photos/
Vehicle: 1992 L300 P35W, White
Location: Vancouver Isle

Fiamma Bike Rack

Post by sealica »

I'm expecting a no. But would it be possible to upgrade the liftgate struts to lift ... with bikes mounted?
philmeup1
Posts: 515
Joined: Wed Aug 22, 2012 6:20 am
Member's Photo Album: http://www.delica.ca/Photos/
Vehicle: 1992 Delica
Location: Ontario

Fiamma Bike Rack

Post by philmeup1 »

Actually the answer is a yes. I had a Terzo ladder on my rear hatch before installing the Fiamma Bike Rack. My struts became weak over time (even before I had the ladder installed) so I sent them to Strutwise out in BC. The guy that owns the place is great. We talked about adding extra reinforcement for the ladder and he said it was no problem. I'm from Ontario so I shipped them out, and when I got them back, they were better than new.

My hatch opens no problem with just the bike rack on the rear, but I doubt it would with the added weight of a few bikes. Anyway, I no longer have his number, but I would look up Strutwise and call him. Perhaps he can charge up the struts to hold up everything. Just remember that the more power you put into the struts, the harder it is for the hatch to close with less load on them.

Cheers, Phil
Post Reply

Return to “Delica Modifications”