TieMyShoe's Grinded Cam

Mitsubishi Delica Camper vans, lift kits & other Delica Accessories!

Moderator: BCDelica

takeuchi
Posts: 45
Joined: Thu Nov 06, 2014 11:08 am
Member's Photo Album: http://www.delica.ca/Photos/
Vehicle: 1992 Starwagon Super Exceed
Location: Vancouver

TieMyShoe's Grinded Cam

Postby takeuchi » Sat Apr 14, 2018 9:32 am

I ended up getting ahold of one of TieMyShoes Grinded cams, so I thought I would post my thoughts on it after driving with it a while.

It feels like my van doesn't bog down as much going up hills or trying to accelerate at highway speeds. Usually I feel a large dropoff in power once it goes past 3000 rpm or so but with the new cam it isn't as harsh. I don't feel like I'm much faster but maybe because it feels like I'm just not allowing down as much.

I also feel like the EGTs went down a touch as well.

Hopefully Cam can chime in on how much it costs.

Sent from my ONEPLUS A5010 using Tapatalk

TieMyShoe
Posts: 256
Joined: Mon Sep 09, 2013 11:14 am
Member's Photo Album: http://www.delica.ca/Photos/
Vehicle: L300
Location: Abbotsford

TieMyShoe's Grinded Cam

Postby TieMyShoe » Mon Apr 30, 2018 8:22 pm

Glad your happy with the new cam. The grind is designed to move the powerband of the 4D56 a moee usable RPM range. The stock cam has a bunch of grunt out of the hole but rapidly drops off. The new grind keeps you in the power band while criusing or under general acceleration.

I will be doing a second run when i am able to source out more cores. Prices can be expected in the 300-350usd depending on the size of the run.


Return to “Delica Modifications”

Who is online

Users browsing this forum: No registered users and 2 guests