Jensen's EGR Removal Blank Kits - Now With More Cowbell

Mitsubishi Delica part numbers and purchasing information.
User avatar
delicat
Posts: 2327
Joined: Thu Jul 26, 2007 6:26 pm
Member's Photo Album: http://www.delica.ca/Photos/
Vehicle: '92 Exeed '93 Safari '94 Pajero
Location: New Westminster, BC
Location: New Westminster, BC

Re: Cancelled: 1/4"(6mm) CNC-cut EGR Blanking Plate Kits

Postby delicat » Tue Jul 20, 2010 12:42 am

Hey Rich,

Why are you cancelling your post? I know there's an order of 20 kits from the UK to the Island but if Jensen is still going ahead with making those I'd rather buy local... Why get our steel shipped to UK, transformed into EGR plates and shipped back home? No wonder our world is falling apart!

Cheers,
David
'93 Nissan Patrol
'94 Mitsubishi Pajero
Image

"If it ain't broken, modify it!"

User avatar
mararmeisto
Posts: 3275
Joined: Wed Sep 19, 2007 10:00 am
Vehicle: 2013 Toyota Tacoma
Location: Langford, BC

Re: Cancelled: 1/4"(6mm) CNC-cut EGR Blanking Plate Kits

Postby mararmeisto » Tue Jul 20, 2010 7:18 am

Having watched this post from the outside, I think the cancellation is more a victim of herding-cats syndrome than anything.
JPL
I still miss my '94 Pajero!

User avatar
FalcoColumbarius
Site Admin
Posts: 5957
Joined: Tue Jan 22, 2008 1:55 pm
Member's Photo Album: http://www.delica.ca/Photos/index.php?cat=11103
Vehicle: Delica; Chamonix GLX ('92 P25W)
Location: North Van, BC, eh?

Re: Cancelled: 1/4"(6mm) CNC-cut EGR Blanking Plate Kits

Postby FalcoColumbarius » Tue Jul 20, 2010 12:23 pm

Luna-Sea wrote:I am pretty sure both plates are 1/8 stainless steel.

Seriously man, You don't want the top plate to be stainless. I haven't been typing all this stuff about electrolytic reaction because I like the sound of my fingers on the key pad.

Meow.

Falco.
Sent from my smart pad, using a pen.

Seek Beauty... Image Good Ship Miss Lil' Bitchi

...... Vision without action is a daydream. Action without vision is a nightmare. ~ Japanese Proverb

User avatar
delicat
Posts: 2327
Joined: Thu Jul 26, 2007 6:26 pm
Member's Photo Album: http://www.delica.ca/Photos/
Vehicle: '92 Exeed '93 Safari '94 Pajero
Location: New Westminster, BC
Location: New Westminster, BC

Re: Cancelled: 1/4"(6mm) CNC-cut EGR Blanking Plate Kits

Postby delicat » Tue Jul 20, 2010 1:22 pm

Falco, you're the poet of us all! :-D
'93 Nissan Patrol
'94 Mitsubishi Pajero
Image

"If it ain't broken, modify it!"

User avatar
Jensen
Posts: 177
Joined: Sat Jul 03, 2010 9:49 pm
Member's Photo Album: http://www.delica.ca/Photos/
Vehicle: L300 Exceed
Location: Langley
Contact:

Re: Cancelled: 1/4"(6mm) CNC-cut EGR Blanking Plate Kits

Postby Jensen » Tue Jul 20, 2010 2:14 pm

O.k. so to make it easier on myself and since I don't want to track down everybody and PM people and what not I'm going to make 40 of the 1/4" kits (that's the 2 plate one) and I'm going to make 20 of the 1/8" single plates (actual thickness will be 0.105"). These will be the group buy plates and the ones I'm offering for the $10 and $4 price. Once they're gone they're gone. I'll be making more in the future which I will keep in stock but they'll be at the higher price that I listed before (can't remember but I'll check it, it's still really cheap). I'm going to get my wife to set up paypal or something like that to take payment as I'm a noob when it comes to online selling. This will be for people who are ordering these from outside of the lower mainland. Anyone local who wants one I can most likely meet you or drop it off somewhere and you can pay in cash in person. I'd like to have a mini meet to get as many of these dropped off at once and also to have an install tutorial as I don't even know how they go in. So, when I get delivery of the plates I'll try to set that up. Is everybody cool with this? I'm placing the order for the 40/20 right now so hopefully I'll get them back before the weekend.

Anybody that's already PM'd me and spoken for kit's consider your orders booked.
Image

User avatar
delicat
Posts: 2327
Joined: Thu Jul 26, 2007 6:26 pm
Member's Photo Album: http://www.delica.ca/Photos/
Vehicle: '92 Exeed '93 Safari '94 Pajero
Location: New Westminster, BC
Location: New Westminster, BC

Re: Cancelled: 1/4"(6mm) CNC-cut EGR Blanking Plate Kits

Postby delicat » Tue Jul 20, 2010 4:20 pm

That's the way to do it... Just go ahead with it!

As I said before, I'll take two kits of the 1/4" plates, thanks!
David
'93 Nissan Patrol
'94 Mitsubishi Pajero
Image

"If it ain't broken, modify it!"

User avatar
Luna-Sea
Posts: 760
Joined: Mon Nov 24, 2008 4:35 pm
Member's Photo Album: http://www.delica.ca/Photos/
Vehicle: 90xeed+91cmnix,bth5spdz
Location: Nanaimo BC

Re: Cancelled: 1/4"(6mm) CNC-cut EGR Blanking Plate Kits

Postby Luna-Sea » Tue Jul 20, 2010 4:22 pm

Having watched this post from the outside, I think the cancellation is more a victim of herding-cats syndrome than anything.




Git-a-long-bunch-a-kitties!

Right On! 8-)

User avatar
Jensen
Posts: 177
Joined: Sat Jul 03, 2010 9:49 pm
Member's Photo Album: http://www.delica.ca/Photos/
Vehicle: L300 Exceed
Location: Langley
Contact:

Re: Jensen's EGR Removal Blank Kits - Now With More Cowbell

Postby Jensen » Tue Jul 20, 2010 6:21 pm

RichD wrote:This started as me trying to help out in this thread but it seems that there are different people looking to do different things and there was a bit of confusion so I've started a new thread of my own.

Yet Another Edit: Although I grew impatient and threw in the towel, Jensen picked up the ball and if you follow the thread, you'll find its not so dead.

More-Cowbell.gif


Heck no, I get sh#t done... The order for the plates is in, about 1/4 of them are spoken for so if you guy's want them PM me and get on the list. ALSO, don't forget I can pre drill an NPT hole for you if you want on either plate so if you want it done let me know when you PM me.

thanks!
Image

User avatar
Jensen
Posts: 177
Joined: Sat Jul 03, 2010 9:49 pm
Member's Photo Album: http://www.delica.ca/Photos/
Vehicle: L300 Exceed
Location: Langley
Contact:

Re: Jensen's EGR Removal Blank Kits - Now With More Cowbell

Postby Jensen » Wed Jul 21, 2010 11:08 am

Forgot to mention, when you ask for the NPT hole please tell me which plate you want it in (Exhaust for Pyro thermocouple, Turbo for boost pressure gauge) and tell me what diameter you need (Check your kit!).

thanks.
Image

User avatar
Jensen
Posts: 177
Joined: Sat Jul 03, 2010 9:49 pm
Member's Photo Album: http://www.delica.ca/Photos/
Vehicle: L300 Exceed
Location: Langley
Contact:

Re: Jensen's EGR Removal Blank Kits - Now With More Cowbell

Postby Jensen » Wed Jul 21, 2010 5:39 pm

I'm in the process of setting up an online store (paypal and credit card) I've got to phone the shop (as I'm at home sick today) and I'll see how the order is coming along, I'm shooting for delivery before friday.

SO FAR,

I have confirmations from

Luna Sea, Impalator, Seral, Delicat, Afterburners and Manic 29. Some of them are ordering more than one set so I've only got 29 left up for grabs.

People who have mentioned they want one but haven't PM'd me are
Jordan, Sasquatch-hunter, thedjjack, deli 1733, jelbon, Antacoma, Pedro, Electrik-jester, Coaxial, gtex junkie, misterroboto, almac,
golf cart, tait, hankster, lars, yojimbo (not sure if you wanted one or you were just offering advice?), big bird, dennis_lambert (not sure if you want one as I think you're making your own now?)

Anyway, I'm only making 40 of the 2 piece 1/4" thick EGR eliminating kits and 20 of the thinner blanking plates. As I mentioned before, of the people who've messaged me some are ordering multiple kits, so please PM me and confirm asap because once they're gone the one's I'll be carrying will be more expensive. (although still cheaper than anywhere else you can get them!)
Image

User avatar
sasquatch-hunter
Posts: 620
Joined: Sat Sep 01, 2007 8:56 am
Member's Photo Album: http://www.delica.ca/Photos/
Vehicle: 2 Delica
Location: Quesnel BC
Location: Quesnel BC
Contact:

Re: Jensen's EGR Removal Blank Kits - Now With More Cowbell

Postby sasquatch-hunter » Wed Jul 21, 2010 10:52 pm

I defintely want one set of the thinner blanking plate. Can we just meet up and I pay you cash?

User avatar
Jensen
Posts: 177
Joined: Sat Jul 03, 2010 9:49 pm
Member's Photo Album: http://www.delica.ca/Photos/
Vehicle: L300 Exceed
Location: Langley
Contact:

Re: Jensen's EGR Removal Blank Kits - Now With More Cowbell

Postby Jensen » Thu Jul 22, 2010 12:54 pm

yes, I prefer the meeting up cash scenario.
Image

User avatar
sasquatch-hunter
Posts: 620
Joined: Sat Sep 01, 2007 8:56 am
Member's Photo Album: http://www.delica.ca/Photos/
Vehicle: 2 Delica
Location: Quesnel BC
Location: Quesnel BC
Contact:

Re: Jensen's EGR Removal Blank Kits - Now With More Cowbell

Postby sasquatch-hunter » Thu Jul 22, 2010 4:58 pm

Hi Jensen,

Which one is better? The thicker one or the thinner one? Also, when will you have time to meet up? I'll say how about another mini meet @ Ikea COQ. next week (week days evening)?

cheers,
seb

User avatar
mararmeisto
Posts: 3275
Joined: Wed Sep 19, 2007 10:00 am
Vehicle: 2013 Toyota Tacoma
Location: Langford, BC

Re: 1/4"(6mm) CNC-cut EGR Blanking Plate Kits

Postby mararmeisto » Thu Jul 22, 2010 9:45 pm

lopar wrote:These guys in Victoria have them in stock $15

http://enviroimports.com/

Any comments/dealings with them?

Just did the EGR-ripout on Monty and got the blanks from Noel. Exhaust pipe blank was fitted with a welded-in plug to receive the EGT probe - think it was 30$.
JPL
I still miss my '94 Pajero!

User avatar
Jensen
Posts: 177
Joined: Sat Jul 03, 2010 9:49 pm
Member's Photo Album: http://www.delica.ca/Photos/
Vehicle: L300 Exceed
Location: Langley
Contact:

Re: Jensen's EGR Removal Blank Kits - Now With More Cowbell

Postby Jensen » Fri Jul 23, 2010 11:48 am

Pickup time is Monday at noon, sorry I couldn't get these for the weekend.
Image


Return to “Delica Parts for Sale (Non-Commercial)”

Who is online

Users browsing this forum: No registered users and 3 guests