Delica Canada | Mitsubishi Van Club

anybody done/ seen any gains with a better dump pipe right off the turbo?

Good luck Mephisto, like others are saying, it'd be great to see some dyno figures.

When you say "plastic trees" you mean the rivets, right? The white plastic thingies that hold the inside panel in place? Plastic Trees: http://farm1.static.flickr.com/152/332239771_6e27283d86.jpg Plastic Rivets: http://image.made-in-china.com/2f0j00FCeQyuUnEVoz/Plastic-Rivet-GL-.jpg Falco...

Hey Chris, I can't offer much insight into pulling door panels(without damaging the plastic trees that hold the panels in place), but try using a magnetic screwdriver or if that's not strong enough stick a strong fridge magnet on the screwdriver as close to the end as possible and see if you can pul...

I'm doing an order on some parts and I'll see if I can source one.

An example I did a long while back, sadly I'm usually too busy to take pictures: Before: http://i20.photobucket.com/albums/b230/kbs13/Details/d3.jpg http://i20.photobucket.com/albums/b230/kbs13/Details/d2.jpg http://i20.photobucket.com/albums/b230/kbs13/Details/d5.jpg http://i20.photobucket.com/albu...

Hey guys and gals, I had tried this for a while with a little success, but figured I'd give it another shot since employment is scarce. Doing exterior machine polishing and interior cleaning/stain removal on all vehicles. PM if interested, I'm located in Nanaimo now, but will travel a bit. Cheers, K...

Yellow LED's are the best in my experience, they cast the most usable light but don't make your corneas pucker every time you open the door at night.

sadly she's sold.

ah yes, it probably was you, for some reason the green and blue sort of cross over in my mind... looks great... still really want one and that just made the decision even easier.

Pretty sure you live in the area, if I remember correctly it's a blue over jade silver with a small lift and flares. Really cool.

Nice work David! I know that auction report from somewhere.. autosquare?

my scooby has those sprayers and the difference is noticeable when on a long climb. To keep things from getting wet however, you may want to make some sort of a vented tray beneath to shunt the water off to the back or the side, a small piece of sheet stainless and a little fudging would probably do...

You may want to look at a Pajero Injection pump as it has a temp sensor to adjust fuel mixture based on the air being fed to the engine post-intercooler. Glen at ccautos or Butch at CVI will likely have spares, and although they aren't cheap, your rig will be easier to start and better on fuel, and ...

That's exactly how I drove my Delicas, you can get it to downshift quite nicely based on throttle position. I know for a fact it wasn't driving style.