Delica Canada | Mitsubishi Van Club

So thanks all and Growler for making the remedy less esoteric for most of us :o I would not even have notice that hole on the side of the bolt, sooooo tinny... :shock: And what looks like a spring (the picture with the measuring tape) is in fact the screen :o Will keep in touch if I have it in my Va...

Delete unrelated picture

Delete unrelated picture

Hallelujah! Issues resolved! There was a hidden little screen in the fuel supply line right at the banjo fitting before the IP that was totally clogged. Such a simple thing and yet so hard to find! Truck is running better than ever, EGTs on the highway below 200C. Pretty relieved Can someone post a...

Hallelujah! Issues resolved! There was a hidden little screen in the fuel supply line right at the banjo fitting before the IP that was totally clogged. Such a simple thing and yet so hard to find! Truck is running better than ever, EGTs on the highway below 200C. Pretty relieved Can someone post a...

From other posts: if you block heater is not enough in the extreme cold weather, you may consider aa engine coolant heater that you use simultaneously 8-) You will have both, the oil and the colant warmed. :o Healty Battery (Batteries) is most likely crucial too :shock: I started mine this morning a...

That groove was "stock" from original Mitsubishi Leafspring (mine is 1990) Cannot confirme if it was factiry molded or wearing marks... Overtime, it become a weapoint

Lapprentis

I am having that insame High EGT issue :-( The Cooling system had been adress (New Radiator/Hoses OEM Thermostat, Temperature Sender, Fan Clutch assembly). Timing Belt, Water Pump done recently. I do have between 100-250F hotter than usual (comparing to before and it is winter overhere... :? ). Almo...

I am having that insame High EGT issue :-( The Cooling system had been adress (New Radiator/Hoses OEM Thermostat, Temperature Sender, Fan Clutch assembly). Timing Belt, Water Pump done recently. I do have between 100-250F hotter than usual (comparing to before and it is winter overhere... :? ). Almo...

When I asked for unbenting my real leaf springs, one of it broke: I ended up with two new/custom built leaf spring sets ! My stock leafspring had some kind of a groove on it and if any rust/fatigue will become a weakpoint and break if stressed

Lapprentis

Seems to fits many Vans/Buses including VW Bus, Vanagon, Eurovan :)

Lapprentis

Hey North54, I am sure I did replyied to you with all the informations but I do not see it in my sent box.......Yes, that is OK for me ! It should cost me about 40-45CAN to ship it to your place :)

Please contact me here for the follow up.

Thanks

Denis

lapprentis777
@
gmail.com

So, recently, when filled up the Van, the Fuel Needle stay at the bottom (happend more than once) :( Will work again after a few cutoff/restart but will not get at the very top: somewhat to even above "F" mark like usual.... Any suggestions ? Thanks !

Lapprentis

Check the comments about the Gutter area : http://www.delica.ca/forum/viewtopic.ph ... ter#p63077

Lapprentis

Where are you located in NB ? Why to you bring it to Edmonton : there are soo many L300 in the West ? Where was that Van advertized ? How much did you pay ? We do not see too many Silver L300 :) Any more pictures ? Just curious :)

Lapprentis