Delica Canada | Mitsubishi Van Club

Has anyone out there in delica land experienced this.... Started off as a Terrible squeal and fluctuating voltage..Must be Alt belts.... As I started tearing in I realized the Alt Pulley on the Crank pulley appears to have completly seperated!! The Alt Pulley appears to be bonded on or a interferenc...

Snow has fallen and since melted and still the chamonix has not moved!.....i will keep an eye on it for you as your probably out of town.....

Noticed a sweet Green Chamonix L300 with Manitoba plates parked in our hanger parking lot!So I parked right next to you.....I assume you are here contracting,Welcome!!
Cheers!
Dennis.

Thats sucks Al!!
If you need a place to pull engine you can use my heated garage and tools...

Personally I would just leave it...Not too sure... but if you knock a chunk of carbon off and down the hole it might damage your turbo.

That does not look correct!Is it possible the nut has bottomed out...You might need a shorter bolt or a bolt with longer threads.
Actually come to think of it your lift Mod probably caused it... Can you shim out the upper attatch point to drop sway bar down a wee bit?

Hey Al,
I am most likley game for July long weekend!
Hopefully there wont be a fire ban on by then...camping is just not the same without a campfire!Thats the one thing that annoys me about the OK..fire Bans..maybe two things..forest fires suck too!!
Do you have a spot in mind?
Cheers!

The Okanagan Deli's should just come down to Penticton on teh day of the Peach City Beach Cruise (June 22 (parade day), 23 (show&shine day), 24th). We can have a mini parade after all the 70's Muscle or just park in a group and look tough like MF'n Gangstas! ...but its got teh schedule of event...

I am in for camping,
Any thoughts on a date?I typically have to work Sat.But can meet Sat evening for a weekend camp.
Keep me posted please,
Cheers!

Thanks all for your responses. You've given me lots to try. I suspect most of these methods (aside from the vice grips & heat) will involve removing the manifold? - Jason Actually there is quite a bit of room...with removing a few parts.. -First remove Seat -Remove air filter housing/Glow relay...

Another option is to grind flush then center punch and drill a new hole, tap it and build your block off plate to suit. Good Idea... Sigurross if you are going to drill a new tapped hole and require an EGR blank blanking plate (No holes) I have quite a few slightly Mis-shapped ones I could send you...

You have a couple of possible options.... If there is any stud left sticking out sometimes you can get lucky by using vise grips and heat..... Or I recomend soaking in aerokoil then use a center punch to mark center of hole use a angle drill with a 1/8 bit and drill a hole in center of stud then sma...

Thanks Tojo for the Awsome Drawing!!
Good point jfarsang on the Gasket!
Maybe a Moderator could move Tojo's Drawing to the tech section.....

It was a pleasure meeting everyone!
I look Fwd to getting another meet going...Next time maybe around a bonfire or barbacue like Al had mentioned!
Al I will give you a call soon...just been a little swamped for time this week...
Cheers!

Sounds Good,
Yeah I still sell oil filters etc....
Here is a link to my always under construction site!!
Cheers!
http://nomadjdmautopartsca.ipage.com/index.html