Delica Canada | Mitsubishi Van Club

So fiddling with the boost after replacing my cylinder head I had what seemed like a great setting. I did this before heading down from Wenatchee to Portland. Boosted quick, and was running 12 PSI with the pedal maybe halfway depressed. Peppy and the coolant temps were down even climbing hills...

Hey guys! I recently bought a 1998 Mitsubishi Delica Chamonix. Pics to follow!

Why is this thread 2.0? Because in my L300 I installed a legendary one piece garage flooring where with one piece the floor wrapped up against the front engine block, walls, and even around the wheels wells which required some focused and commited angles cuts. To make it work I glued the floor down...

After fitting air shocks to the rear of my van, which slightly stiffen the rear suspension, I've been thinking that the front suspension is way too soft.

The Japanese market L300 4WD wagon (P25/35W) has 20mm diameter torsion bars on the front suspension. Light springs like these make for a...

I've got some ilco deli keys. Let me know if you want some and we can work something out.

We’re replacing the leaf springs on my l300, we got the rear shackles removed, u bolts, it all came off fairly easy. everything except the front bushings, the oval shaped ones. We have the nut off but the bolt won’t budge. Spent probably 7 hours on them using a big impact on the bolt, a ton of...

My transmission fluid is a lot darker than I had previously thought from just looking at the dip stick, so I'm guessing it may be original and at 145,000km...

The manual has a procedure for "fluid change" (pan drain) but not for a complete flush... I didn't even see a service interval...

Lately my automatic had been shifting harshly from 1st to 2nd, and felt like it was slipping in 2nd. Then yesterday it refused to shift out of 1st when cold for about a minute.

Time for a transmission rebuild? Panic. Check bank balance. Panic more.

Luckily it turns out the kickdown cable...

Yesterday while driving after a rain my overdrive kicked out while doing 60mph/100kmph. I was leaving at the next exit anyway so it wasn't a big deal... After slowing down a bit it kicked back in at about 50mph and then several minutes later it kicked out again. The rest of my drive was at 35mph so...

Hello all!

We managed to break one of our slider bolts on our Delica (L400)... We have not been able to find a part # for this anywhere, and really need to get one ordered.

Any suggestions???

TIA!

I'm in need of a manual tranny dead or alive

On my recent trip to Silence lake I came home to find another mouse nest on my batteries. This is @ least the third time it's happened and I'm concerned they'll do more than chew up the paper towel I use to check my oil. I've also had other occasions where I can hear them chewing somewhere under...

My rear leaf springs are pretty tired and flat and am looking for options to bring them back to life or purchase new.

I got very different quotes by 2 local spring shops. One was around $800 to just re-arch and the other was about $500 to re-arch and add a leaf. The issue I've been reading is that...

I used to own a 96 4m40 with and did the "more power hour" and loved it.

I'm looking at possibly picking up a 1998 S2 diesel, I know the S2 is electronically controlled, but I don't know much about them. I know the mechanical injection is regarded as being more reliable, but do the S2...

Anyone know if there is a difference between the pajero models V78 and V78W? I am looking for parts and i see both. Not sure if there is a difference. I think i will need headlights so not sure if these ones will fit even though they look exactly the same from appearances.

Seller lists approved...

Like a lot of things in life, it happened suddenly and it came out of left field. I was driving to Jay & Christine's, east on the No.1 just west of the Kensington Exit when I smelled what first seemed like hot brake shoes. The first thing I did was check my E-brake, it was disengaged. My next...

So i finished up putting a new head on the old girl this week and this morning i did a compression test. I got 500psi all across the board. Is this cause for rejoice or should i be worried about something?
One thing maybe to note is the bottom end was rebuilt 40k km ago and I'm not sure what went...