Delica Canada | Mitsubishi Van Club

Sure the spare grill is for grabs. No other parts but what's listed. It's not off a wreck it's just leftovers from my upgrades. Want to meet?

All items are from a 1994 Mitsubishi Pajero 2.8l LWB
I have an Aiba Works safari basket that fits a Pajero for sale. $300
2soft spare tire covers $20 ea
1hard spare tire cover $40
Used OEM torsion bars $50
Jump seats from LWB Pajero $200 obo
OEM rear step $30
OEM mud flaps $30

Lol. Yeah...
Mitsubishi must wire it like that for some reason, the Pajero's are the same. Reverse on that light only. Who knows..

Well the right answer is to measure what you have at the light socket... The 9 v battery was to test the bulb polarity preference inside in the warm with a beer in hand and after that it kind of goes without saying which is positive and negative on the van. However your answer is also right if you ...

Yeah my Pajero was fine for all non error free except the side markers. For some reason they were backwards. Not sure why.

The polarity is backwards. You should have bought error free bulbs. You will need to switch the 12vdc with the ground for these to work. I recommend getting a different bulb. Cree plus smd are mucho better and error free but that's just me. The basic smd bulbs are not that bright. You can test this ...

Expensive but with paying for. As long as your happy with them that's all that matters.

I had mine done and they said the same. They were just covering their ass in the event that it did become damaged. It didn't .. no problems. I used Kirmac on east 1st ave. They were great.

... tiny. Its a tiny screw. Should be able to pick one up anywhere.

Yes. I adjusted the cable and it was much better. You just park it and shift it into N. Then go under located the adjusting nut and loosen it off. Then pull the cable tight and cinch down the nut again. Once done check that the engine wont start in anything but P and N. Then go for a drive.

One name. CREE!!!! I have gone through the ringers with my lights. There are heaps of shit LED's out there. The biggest issue with lots of the 1157 "dual element" replacements are the difference between day time run and break. IF there is not a noticeable difference then that is not safe f...

Hey I have the same. Mine never worked. However I was able to do some digging and keep it simple first. They are exposed and take a lot of damage. The sensors are easy to get at and just require removing two bolts. They are on the inside of the front wheel. Carefully remove them and clean the sensor...

Well then come out to IKEA coquitlam on friday at 7pm ish and have a look. A few delis and a pajero will be getting together for ameet.