Delica Canada | Mitsubishi Van Club

Sweet wheels! Good thing my keyboard is spill-proof because it got all drools over on it.

Good luck with sale, and the new owner will be the luckiest one.

Perfect thanks, I did the math and the ideal backspacing for 16x7 rim would be between 4.125 to 4.5 if comes with tire size 265-245/75R16. Sounds right? What driving behaviour and risk would I expect if I decrease backspacing to put tire wall closer to side door slider? 2.625 instead of 4.125 for 26...

M8 20mm bolt fits perfect for 1/4 thick plate.

What is L400's stock wheel backspacing?

Will LT245/75/16R fits L400 without any lift, if not then how high do I need to lift?

Thanks,

I got EGR blanking plate but I think I need shorter bolts when install blanking plate on 2.8, do anybody know size and tread bolts I need?

Thanks,

without getting out of van to unlock hub? Sorry I was very vague about that part, what I mean is "fool" free wheeling clutch thinking that transfer case is on 2H but actually it is on 4LLC meaning you will have low gear RWD without manual hub. Will that work? or I might have wrong concept...

do you have dash light dimmer switch? Mine just came off today and found that clip was broken, also "click" seems nonfunctional since I bough the van. I think it supposed turns dome lights on.

Was cup slider already sold with center console?

Will it possible to manipulate switch sensor to keep freewheeling clutch (lays beside front differential) unlocked when you shift to 4WD(H/HLC/LLC) without getting out of van to unlock hub?

I may not understand fully how manual hub works, but what do it benefit to have one on L400 with Super Select?


Sean

"to boldly go where no Delica has gone before."

I am so envy of you guys *hand clapping*

Any more pictures?

I intend to go back to the Whipsaw and explore the last 30 kms more thoroughly this time. Is it the last 30 km from Wells Lake to Lodestone Lake on way to Coalmont? I like to share it first if you haven't been there. There were few spots that seems impassible for my stock L400 there without taxing ...

Thanks, I will replace it with grade 8 before pulling any trailer.

Yeah 50 wont cover everything, just supplies and luck. I bought incomplete class 3 hitch kit (bolts and some parts are missing) from princess auto for 40 dollars and a metal plate. I used friend's plasma CNC to cut plates to make parts then assembled a hitch with hitch kit from princess auto. Now it...

I had my hitch custom made on my L400 for 50 bucks and uses class III for same reason as yours but I kept rule of thumb for any car; pull no more than 3/4 of vehicle's weight that I have not tried and no more than 1/10th weight on the hitch which I already used for rear rack to keep height under max...

I drove up on parmental road off cultus lake road until theres a right turn with couple of tree planted in middle of gravel road (roughy 5km). On left side theres an ATV trail, thats where we started from there. Theres a steep climb on left shortly after entered ATV trail, once I get on top theres a...