Delica Canada | Mitsubishi Van Club

got em!!
Van has been working quite well with the temporary button although I did find a broken off wire on the IP that I reconnected,
hope to put in the new relays this weekend...
good times!!

I'm thinkin 2 of these may do the job?
12 volt 50 amp

Are they both 6 volt?? Got the no clicky clicky happening but a -2 volt jumper to the bus bar fires her up. Thinking to just leave them out and run a momentary 12 volt button. Took one apart and it smells fried and seems to be burnt... Best to replace as original is is the button a simpler and more ...

So I just wanted to update this trans issue that I posted about earlier...I poured a Guiness and am happy to say all is well with Adele , my van...I let her sit and think about why she was so upset from the long road trip but after dropping her pan, cleaning the atf screen and putting in new fluid s...

Thx for the info. Checked fluid in park - yes Pulls strong against the park brake in all gears(d,2,1 and r) for a few feet then no more Like I said, i plan to drain and drop the pan and see from there...it just boggles me since we had highway driven it for 4 days and all shifting was perfect, no pro...

Hi all! I' ve gleaned lots of info from this site, havent contributed much but am now asking for some/any input from the automatic transmission guru's on here. Long story short- have enjoyed my L300 for 85000 kms so far. Replaced trans with low- mileage unit last fall (Nov2017) Amazing marty did the...

I find with 235/75/15 that whatever speed my speedo reads I’m still always being passed so I dont really worry about it. This coming spring with plans for a bit larger tires (30”) I guess I’ll just have to leean a little bit more forward into the wind and for aerodynamics and open the windows a bit ...

Hi all! I've been an L300 driver for the past 6 years and have gleaned sooo much helpful info from this site and am finally posting a question.Thank you all. I'm doing a transmission change on my L300 and I'm looking for the part numbers for the crankshaft seal and the transmission output shaft seal...